Lindy 4K HDMI and USB Over IP Extender, Receiver 38267
Lindy 38267 is a 4K Over IP Extender system allows users to extend a 4K video source such as a PC or PVR through a standard Gigabit IP network letting the user control it from the remote side through the extended USB interfaces.
Description
Extends HDMI 4K (3840x2160p60Hz 4:2:0) or VGA (max 1920×1200) Video signals over a Gigabit IP network
Supports point to point installation up to 100m (393ft) and point to multipoint installation using a Gigabit Switch (also for Video Wall creation)
Extends USB 2.0, USB HID (for KVM functions), bidirectional analog audio, bidirectional IR and RS232 signals
HDMI 2.0 & HDCP 2.2/1.4 compliant
2 year warranty
This receiver unit can be connected to a transmitter unit (No. 38266 – not included) to create a standard point to point control system with a maximum distance of 100m (393ft). The transmitter can also be connected to many receivers, allowing a single device to be controlled from different consoles at the receiver end or creating a Video Wall installation via a dedicated Gigabit Ethernet (supporting 8kB Jumbo frames) switch on the same private network.
Besides the HDMI embedded audio signal, this unit also manages 2 additional audio channels (1 x Line out audio from the source side and 1 for microphone connected on the remote side) and a SPDIF optical port on the receiver unit to connect a digital audio amplifier or device.
Specifications
Product ID: 38267
AV Interface: HDMI & VGA
Console Interface: USB
Interfaces Standard: HDMI 2.0, USB (HID) and USB 2.0
Supported Bandwidth: 10.2Gbps
Maximum Distance: 100m (393.7ft) (Point to Point)
Maximum Resolution: 3840×2160 60Hz 4:2:0 8bit (VGA Max 1920×1200 60Hz)
HDCP Support: HDCP 1.4 and 2.2
Supported Audio: Audio supported over HDMI signal and 2 analog bidirectional (1 x Audio and 1 x Microphone)
Separate Audio Ports: 2 x 3.5mm (Female), 1 x SPDIF Optical
Transmission Protocol: IP
Transmission Medium: Cat.6
Laser Class (only for Fibre): –
Wavelength (only for Fibre): –
Video Codec: Motion JPEG
Latency: 33ms Approx.
Special Features: Video Wall Function (up to 16×16 screens), VGA Input & Output support (max. resolution 1920×1440), Bidirectional IR and Serial RS232 Extension
Connectors
Transmitter KVM Interfaces: –
Transmitter Extension Port: –
Receiver Consolle Interface: HDMI (Female), 2 x VGA (Female), 2 x USB 2.0 Type A (Female), 2 x USB HID Type A (Female), 2 x 3.5mm Audio (Female)
Receiver Extension Port: RJ45 Gigabit Ethernet (PoE support)
Bidirectonal Ports: 1 x DB9 (Male) for RS232
Other Interfaces: 2 x 3.5mm (Female) for bidirectional IR, 1 x SPDIF Optical for Digital Audio, 2 x RJ45 Ethernet Ports
Power: 5.5/2.1 mm DC socket
Rating & Review
There are no reviews yet.